Roof Restorations Australia | The Roofing Professionals

Yes, roof restoration is often worth it as a cost-effective alternative to full roof replacement. It extends the lifespan of your roof, improves its appearance, and can boost your home's curb appeal and value.

The most common roof repair is addressing leaks. This can involve fixing cracked or missing tiles, repairing flashing, patching or replacing damaged shingles, or addressing debris buildup in gutters. Other common repairs include replacing damaged or missing tiles, repairing or replacing valley irons, and cleaning and repairing gutters. Roof repairs take many different forms, so here are some of the most common ones:

To temporarily stop a roof leak, locate the source, clear the area, and seal it with roofing tar or caulk from inside. However, this is only a short-term fix - always contact a professional roofer to properly assess and repair the leak.

Roof painting typically takes 3 to 4 days to complete, but this can vary based on factors like roof size, type, and the extent of repairs needed, in addition to the weather. Professionals often allocate 2-4 days for an average-sized roof to allow for proper cleaning, repair, and quality painting.

Roof cleaning costs in Australia typically range from $400 to $1,200, with an average cost of $765 for a 1,700 square foot roof. Costs can vary based on the roof's size, material, condition, cleaning method, and location. Some factors that can increase the cost include complex roof designs, steep pitches, and the need for specialised equipment.

Depending on the roof’s size, complexity, and accessibility, a roof inspection usually takes around 1-2 hours to fully complete. If you have an easy up-and-over roof with a walkable pitch, your inspection will be on the shorter side. On the other hand, an inspection takes longer if you have a two-story home with a steep roof cut up at multiple angles. This is mainly because there’s much more to navigate, and proper safety precautions must be taken.

When you have a roof leak, it's best to call a qualified roofing contractor to assess and repair the leak, such as the team at Roof Restorations Co. They have the expertise to diagnose the source of the leak and make the necessary repairs to stop water from entering your home or building.

The cost of a roof restoration can start from around $5,000 up to approximately $20,000 with a number of variables that will affect the total cost including:

Roof painting is a process of high-pressure water blasting the tiles, replacing broken roof tiles, repointing cracked mortar and applying one (1) coat of Roof Protect Primer and two (2) coats of Roof Protect Membrane to the roof, in order to protect it from the elements, such as wind, rain and ice, as well as to help keep out pests - acting as a potential deterrent by creating a barrier that is less attractive to insects and other critters.

In addition to having your roof inspected annually, there are some other times when you should consider having your roof checked:

A roof report, also known as a roof inspection report or roof condition assessment, is a document that details the condition of a roof. It's essentially a comprehensive evaluation of the roof's structure, covering aspects like the condition of tiles, metal sheets, and any areas of concern. These reports are valuable for homeowners, buyers, and sellers, providing insights into potential problems and their lifespan.

A whirlybird, a common name for a type of roof vent - also known as a turbine vent or roof ventilator - is a cylindrical dome that spins in the wind, creating a vacuum which extracts warm air from the roof cavity. Whirlybirds are popular because they're inexpensive, easy to install, and require little to no maintenance once installed.

A whirlybird, a common name for a type of roof vent - also known as a turbine vent or roof ventilator - is a cylindrical dome that spins in the wind, creating a vacuum which extracts warm air from the roof cavity. Whirlybirds are popular because they're inexpensive, easy to install, and require little to no maintenance once installed.

How Long Does The Whole Process Take? The roof cleaning process is generally completed within a day, although it will vary depending on the state of the roof, how steep it is (the pitch) and the method or methods used.

Hourly rates can be anywhere from $40 to $90 per hour or more, and this rate doesn't give the best indicator of your total roof repair cost. A square-metre roof repair quote can be more accurate, which can cost anywhere from $15 to $35 per sqm on average.

• Minimise Damage by Catching the Water: Place a bucket under the leak and wipe excess water to avoid slip hazards.
• Control the Water Flow: Turn off your home’s water supply if the leak is significant (if the source of your leak is from a water pipe).
• Contact Roofing Professionals: Opt for experts like AllCoast Roofing on the Gold Coast, boasting 35 years of trusted service.
• Document the Damage: Take clear photos for insurance claims.
• Notify Your Insurance: Provide necessary documentation and follow the claim process.
• Repair the Leak Source: Ensure structural soundness after fixing and consider a paint job for aesthetics and protection.
• Regular Maintenance: Inspect your roof, gutters, and other potential problem areas to prevent future leaks.

Plain water is often the most common cleaning agent for roofing. Dust, dirt and other elements that aren’t abrasive will likely wash off a roof easily if you just hose the roof down. You can use as much water as necessary until the roof is clean. You can also use detergent like laundry detergent, mild dish soap, or car washing soap to get rid of stains that are a little more difficult to remove. You may also want to use industrial or commercial detergents that can be used with hot or cold water to ensure your roof is clean. It’s usually best to mix the detergent with water and use a washcloth or sponge to apply the solution to the roof. Let the mixture stand for about 10 minutes before rinsing the roof thoroughly with water. For detailed information about the cleaning process, we suggest checking out BlueScope Steel, the manufacturer and parent brand of Colorbond, and their available PDF on Maintenance Of Colorbond Steel and Zincalume steel.

Roof rebedding is a roofing repair process that involves replacing or refreshing the mortar or bedding material that secures roof tiles or ridge caps to the roof structure. Over time, the original bedding can deteriorate, crack, or become loose, compromising the stability and watertightness of the roof. Rebedding ensures that tiles are properly aligned and securely held in place, preventing leaks and damage.

A professionally painted roof with Industrial Roof Coatings can last up to 20 years. Factors such as the quality of preparation, and the environmental conditions can affect this lifespan.

Repointing a roof generally costs between $20 and $25 per lineal metre. For an average-sized roof, expect to pay around $1500 to $2500 plus GST. The cost can vary depending on the size of your roof, the extent of the damage, and other factors like access difficulty.

The average cost of replacing roof tiles can be anywhere from $85 to $155, but this depends on the type of tile and features of your roof.

Gutters generally need replacement every 20 to 30 years, but this can vary based on material, climate, and maintenance. Aluminium gutters typically last around 20 years, while copper gutters can last much longer, potentially 50 years or more. Regular cleaning and prompt repairs can extend the life of any gutter system.

Repointing roof tiles involves removing old, deteriorated mortar from the joints between tiles and replacing it with fresh mortar. This process is essential for maintaining roof integrity, preventing water penetration, and extending the roof's lifespan. Repointing essentially seals the joints between tiles, preventing water from seeping into the roof cavity.

The cost to paint a roof in Australia can range from $2,000 to $12,000, but can vary significantly based on factors like roof size, material, and condition, with smaller roofs costing less and larger roofs costing more.

A well-executed roof restoration can last between 15-20 years. However, this lifespan is not cast in stone; it depends on several factors such as the quality of materials used, the expertise in workmanship, and weather conditions.

There are generally three main types of roof tiles for use upon a pitched roof, and these are; clay, concrete, and slate. The choice of tile should be informed by the pitch and the structural capabilities of a roof. Alongside performance and aesthetic attributes all tiles have a minimum pitch requirement and weight.